User's Manual

Additional Reports Report Functions
8 - 46 0070-00-0575-50 Panorama™ Operating Instructions
• This report shows a cursor line in the graph for the Cursor Time posted on the report.
• The data plotted in the Trend Graphic Report reflects the trend data records that were
collected based on the Trend Storage Interval settings in the Panorama Central Station.
• The report shows one plotted point for each parameter sensor.
• Dual sensor parameters (such as INSP/ET CO2) are plotted individually then connected
with a line (for example, inspired and end tidal values).
• Multiple sensor parameters (such as NIBP) are plotted individually then the systolic and
diastolic points are connected and a single point is shown for the Mean measurement.
8.4.4.4 Footer
The Trend Graphic Report contains a footer at the bottom of every page. The footer includes
the following:
• The date and time of the print request. The format displayed is taken from the System
Date/Time tab.
• A centered page number.
• The name of the Panorama Central Station from which the report was generated.
8.4.4.5 Printing a Trend Graphic Report
The Trend Graphic Report is printed in landscape orientation, using any of the following
methods:
• Select the Print sidebar button from the Trends (Graphic) tab.
• From the bedside monitor, verify that Select Printer option is configured to print
remotely, and that the trends graphic option is active, then press the PRINT TREND
button.
NOTE: Requesting this report posts a print job in the system Print
Status tab.
8.4.5 12-lead Report
The 12-lead Report provides analysis of 12-leads of ECG data for the selected patient tile.
This report includes a header and waveform data.