User's Manual

Patient Reports Tab Report Functions
8 - 24 0070-00-0575-50 Panorama™ Operating Instructions
8.1.7 Patient Alarm Report
The Patient Alarm Report is a single page report containing a patient’s alarm settings
information (unit of measure, alarm limits, priority and alarm responses). This report includes
a header, patient alarm data and a footer.
FIGURE 8-15 shows an example of the Patient Alarm Report.
FIGURE 8-15 Patient Alarm Report
8.1.7.1 Header
The Patient Alarm Report’s page header provides the title of the report and basic
demographic information, if it is available. The demographic information includes the
patient’s first and last name, identification number, bed number, weight, height and doctor.
If the demographic data was not previously entered in the system, only the demographic
label is shown.
8.1.7.2 Patient Alarm Data
The Patient Alarm Report’s data section includes alarm information for all of the alarms. The
parameters in a Patient Alarm report are dependent on the device connected to the selected
patient tile.
• The first column of this report displays the parameters for which the specified patient has
an alarm.
• The second column of this report displays the unit of measure in use for the parameter
specified.