User's Manual

Panorama™ Operating Instructions 0070-00-0575-50 8 - 11
Report Functions Patient Reports Tab
The Print Selection Dialog Box
Use the Print Selection dialog box (FIGURE 8-6) to determine a print interval. The report
can be generated for 1, 2, 4, 8, 12 and 24 hour intervals.
NOTE: If a new patient is selected while a dialog box is open, the
dialog box closes.
FIGURE 8-6 Print Selection Dialog Box
Printing a Full Disclosure Report from the Print Selection
Dialog Box
1. Select a time interval button.
NOTE: If the number of hours selected exceeds the amount of data
in system, the report shows only of the available data.
2. Select the Print or Cancel button.
• Select the Print button to generate the report and close the report dialog box.
• Select the Cancel button to close the dialog box without generating the print request.
8.1.4 ST Report
The ST Report includes current and reference digital values with the associated ST templates,
for a selected patient tile. This report includes a header, ST data and a footer section.