User's Manual

Patient Reports Tab Report Functions
8 - 10 0070-00-0575-50 Panorama™ Operating Instructions
• The first column contains the time (hour and minute) of the disclosure record. The time
format follows the system format specified in the Date/Time tab.
• The second column contains a heart rate (HR) value. The heart rate value shown is from
the last second of data that was collected during the disclosure record. If disclosure data
is not available for the time period specified, dashes are shown in the place of a heart
rate value.
• The third column contains a label for the waveform data being displayed in the report.
The waveform label shown is the source of data for the disclosure record.
• The fourth column contains the events that have occurred during the period of the
disclosure record. If multiple events occurred during the time period specified then the
event with the highest priority is displayed. If no events occurred during the time period
specified, this column remains empty.
8.1.3.3 Footer
The Full Disclosure Report contains a footer at the bottom of every page. The footer includes
the following:
• The date and time of the print request. The format displayed is taken from the System
Date/Time tab. For more information regarding date/time formats, refer to the “Date/
Time Tab” on page 9-27.
• A centered page number.
• The name of the Panorama Central Station from which the report was generated.
8.1.3.4 Printing a Full Disclosure Report
This Full Disclosure Report is printed in portrait orientation, using any of the following
methods:
To print one hour of full disclosure data:
• Select the Full Disclosure Report button in the Patient Reports tab, select the 1
Hour button, then select the Print button in the Print Selection dialog box.
• Select the Print Hour button in the Disclosure tab.
To print multiple hours of full disclosure data, follow either of these methods:
• Select the Full Disclosure Report button in the Patient Reports tab and the time
interval button (2 Hours, 4 Hours, 8 Hours, 12 Hours, 24 Hours) followed by the Print
button in the Print Selection dialog box.
• Select the Print Hour button in the Disclosure tab, select a time interval button (2
Hours, 4 Hours, 8 Hours, 12 Hours, 24 Hours), then select the Print button in the Print
Selection dialog box.
NOTE: Requesting this report posts a print job in the system Print
Status tab.