User's Manual

Patient Reports Tab Report Functions
8 - 6 0070-00-0575-50 Panorama™ Operating Instructions
• Select the Print All Strips button in the Patient Reports tab. Selecting the Print All
Strips button will post an Alarm Report print request for the selected patient.
• Select the REC button in a patient tile.
• Select the Print button in the Bedside tab.
• Enable the Print on Alarm option in the Alarm Responses tab when there is an alarm
condition.
• Select the Strip button on a Passport 2
®
.
• Select the Strip button on a Spectrum™.
• Select the Print button on a Telepack (refer to “Button Indicators” on page 10-3)
NOTE: To print this report for all active patients, use the System
Reports tab Print All Strips/All Patients report. Requesting
this report posts a print job in the system Print Status tab.
For report troubleshooting messages and issues, refer to “Troubleshooting” on page 8-25.