User's Manual

Panorama™ Operating Instructions 0070-00-0575-50 8 - 5
Report Functions Patient Reports Tab
8.1.2.4 ECG Waveforms
The ECG waveforms shown in the All Strips Report are based on the ECG lead wire set
currently in use and on the waveforms selected in the Print Setup tab. The ECG waveform
report displays the following:
• An ECG lead label
• A wave gain scale bar and a calibration pulse for wave gains less than 30 mm/mV
• A calibrated grid
• Current ECG monitoring label
• A continuous straight line for active ECG leads that are not connected
Non-ECG Waveforms
The non-ECG waveforms shown in the All Strips Report only include the non-ECG parameters
in use at the time of the print request.
All non-ECG waveforms in the report contain a parameter label and a unit of measure label.
Non-ECG waveforms in the report contain a wave gain scale bar if the waveform is
available at the time of the print request. If the waveform is not available, the report prints
blank data for the specified time period. Also:
• If the IBP waveform was labeled at the bedside monitor, the report contains that IBP label.
• If the Anesthetic Agent was identified at the bedside monitor, the report contains that
Agent label.
Footer
The All Strips Report contains a footer at the bottom of every page. The footer includes the
following:
• The date and time of the print request. The format displayed is taken from the System
Date/Time tab.
• A centered page number.
• The name of the Panorama Central Station from which the report was generated.
Printing an All Strips Report
The All Strips Report is printed in landscape orientation, using any of the following methods: