User's Manual

ManualsBrandsMindray DS USA ManualsElectronicsPanorama Instrument Radio- 608

171

172

173

174

175

176

177

178

179

180

Panorama™ Operating Instructions 0070-00-0575-50 7 - 35

Views ST Tab

7.5.4.1 Configuring ST

1. Select the Config ST sidebar button in the ST tab. The ISO, J/ST and ST Point controls

are displayed in the ST tab.

2. Select the directional arrows to configure the ISO reference line. The ISO reference line

displays in white.

• Select the left arrow to move the ISO reference line to the left one step setting.

• Select the right arrow to move the ISO reference line to the right one step setting.

3. Select the directional arrows to configure the J/ST reference line. The J reference line

displays in yellow. The ST reference line displays in green.

• Select the left arrow to move the J/ST reference line to the left one step setting.

• Select the right arrow to move the J/ST reference line to the right one step setting.

4. Select the ST Point button to select the desired ST Point. Changing the ST point will

move the ST reference line to the right of the J reference line for the selected number of

milliseconds. The options that are available for ST Point include 40, 60, 80 and 60/80

milliseconds.

5. Select the Done button. The Done button is used to confirm the selected ST

configuration.

7.5.5 Done Sidebar Button

Select the Done sidebar button to confirm an action or selection at the Panorama Central

Station.

7.5.6 Print Sidebar Button

Select the Print sidebar button to print an ST report for the selected patient tile based on the

current ST data. For information regarding the ST report, refer to the ‘‘ST Report’’ on page

8-11.

7.5.7 Normal Screen Sidebar Button

Select the Normal Screen sidebar button to return the display to the full screen mode, close

all tabs, message boxes and dialog boxes.

7.5.8 Troubleshooting

This section lists some of the potential messages and issues that may occur while using the ST

tab.

MESSAGE/ISSUE * REASON SOLUTION

No patient Selected! This message appears in the

demographic field when an

empty patient tile has been

selected.

Select an active patient tile.

* Messages are shown in all bold text.