User's Manual

Panorama™ Operating Instructions 0070-00-0575-50 7 - 17
Views Events Tab
All previously collected parameter data is displayed, even if the parameter is not currently
being monitored.
7.3.3 Refreshing the Events List
The Events list is not dynamic, and therefore, will not regenerate until it is refreshed. To
refresh the Events list, select anywhere outside of the Events tab, then reselect the Events
tab. It may take several moments for new events to be displayed on the list.
7.3.4 Events List Alarm Indicators
If a Priority 1 physiological or bedside alarm condition existed for a parameter at the time of
event record storage, that parameter’s data is highlighted in red.
If a Priority 2 or 3 physiological or bedside alarm condition existed for a parameter at the
time of event record storage, that parameter’s data is highlighted in yellow.
7.3.5 Navigating in the List View of the Events Tab
Navigating in the Events list is accomplished by using scroll bars and buttons.
Scrolling through the List
If the Events list exceeds the capacity of the viewable screen, there are two methods of
scrolling through the data:
• A vertical scroll bar located along the right side of the Events list. Use the up and
down arrows of the scroll bar for single row scrolling, or drag the bar to move quickly
through the rows.
• The Page Down (double down-arrow) and Page Up (double up-arrow) buttons located
below the horizontal scroll bar.The Page Down and Page Up buttons are used to scroll
through one page of the list at a time.
Scrolling through the Parameters
A horizontal scroll bar, located along the bottom of the Events list, is available if the number
of parameters listed exceeds the capacity of the viewable screen. Use the left and right
arrows of the scroll bar for single parameter scrolling or drag the scroll box to move quickly
through the parameters.
7.3.6 Events List Tab Buttons
Remove event records from the Events list by selecting the Delete Single Event button
and/or the Delete Events button.
Delete Single Event Button
The Delete Single Event button removes a single event record from the Events list.
To delete a single event record, follow these steps:
1. From the Events list, select the event record to be deleted.