User's Manual

Panorama™ Operating Instructions 0070-00-0575-50 7 - 9
Views Trends Tab
If a priority 1 physiological or bedside alarm condition existed for a parameter during the
time of trend record storage, that parameter’s data will be highlighted in red.
If a priority 2 or 3 physiological or bedside alarm condition existed for a parameter during
the time of trend record storage, that parameter’s data will be highlighted in yellow.
7.2.3.1 Navigating in the List View of the Trends Tab
Scrolling through the List
If the Trend list exceeds the capacity of the viewable screen, there are two methods of
scrolling through the list:
• A scroll bar located along the right side of the Trend list. The up and down arrows on the
scroll bar are used for single row scrolling, or the bar can be dragged to move quickly
through a large number of rows.
• The Page Down (double down-arrow) and Page Up (double up-arrow) buttons located
along the bottom of the Trends tab. These buttons are used to scroll through one page of
the list at a time.
Scrolling through the Parameters
A horizontal scroll bar, located along the bottom of the Trend list, is available if the number
of parameters exceeds the capacity of the viewable screen. The left and right arrows on the
scroll bar can be used for single parameter scrolling, or the bar can be dragged to move
quickly through a large number of parameters.
7.2.3.2 Previous Event Button
The Previous Event button locates and highlights the previous event condition that
occurred before the currently highlighted row.
7.2.3.3 Next Event Button
The Next Event button locates and highlights the next event condition that occurred after
the currently highlighted row.
7.2.3.4 Graphic Sidebar Button
The Graphic sidebar button to open the Graphic view of the Trends tab. When the
Graphic view opens, a cursor is placed at the same date/time as the row that was
highlighted in the List view.
7.2.3.5 Print More Sidebar Button
The Print More sidebar button to provide a printout of a selected time interval from the list.
1. Select the Print More sidebar button. The Print Selection dialog box (FIGURE 7-4) is
displayed.