User's Manual

Panorama™ Operating Instructions 0070-00-0575-50 6 - 9
Patient Alarm Functions Alarm Responses Tab (Patient)
6.3 Alarm Responses Tab (Patient)
The Alarm Responses tab (FIGURE 6-3) adjusts the responses of alarms at the Panorama
Central Station during an alarm condition.
This section includes the following:
• Accessing the Alarm Responses Tab
• Configuring Alarm Responses
• Sidebar Buttons
• Troubleshooting
6.3.1 Accessing the Alarm Responses Tab
1. From the menu bar, select the Patient Alarms menu button. If the Patient Alarm
Setup tab displays, enter the password in the Password text box. The Alarm Limits
and Alarm Responses tabs display.
2. Select the Alarm Responses tab (FIGURE 6-3). The Alarm Responses tab is
displayed.
FIGURE 6-3 Alarm Responses Tab
6.3.2 Configuring Alarm Responses
To configure a patient’s alarm responses complete the following procedure. The adjustment of
alarm responses takes effect immediately after the tab is exited.
1. Choose a patient tile by selecting its digital data or waveform area.
• The patient’s Last Name and Bed number are shown in the Demographics field
and their Patient Size is shown in the Patient Size field if this information was
previously entered in the ‘‘Demographics Tab’’ on page 5-2.
2. Select the alarm to be modified.
• The Alarm Responses list box shows the alarms that can be modified.
• When a alarm is selected, it is shown in white with black text and is shown in the edit
box.
Edit Box
Selected Parameter
Patient Demographic Line
List Box