User's Manual

Print Setup Tab (Patient) Patient Setup Functions
5 - 40 0070-00-0575-50 Panorama™ Operating Instructions
5.7.3 Sidebar Buttons
The following sidebar buttons are used to expand the functionality of this tab.
Restore Previous Settings Sidebar Button
Select the Restore Previous Settings sidebar button to return patient display settings to
those in use when the tab was opened.
Normal Screen Sidebar Button
Select the Normal Screen sidebar button to return the display to the full screen mode, close
all tabs, message boxes and dialog boxes.
5.7.4 Troubleshooting
This section lists some of the potential messages and issues that may occur while using the
Patient Print Setup tab.
MESSAGE/ISSUE * REASON SOLUTION
No patient Selected! This message appears in the
demographic field when either
a patient tile has not been
selected or an empty tile was
selected.
Select an active patient tile.
A waveform does not print The waveform is not selected in
the patient’s Print Setup tab.
Select the waveform in the
patient’s Print Setup tab.
* Messages are shown in all bold text.