User's Manual

Standby Tab Patient Setup Functions
5 - 34 0070-00-0575-50 Panorama™ Operating Instructions
5.5 Standby Tab
The Standby tab is used to place a patient in Standby mode at the Panorama Central Station
and/or the bedside monitor. Standby mode temporarily suspends all patient monitoring,
alarm processing, and trending activity.
NOTE: Patients placed in Standby mode should be closely
monitored.
This section includes the following:
• Accessing the Standby Tab
• Placing a Patient in Standby Mode
• Removing a Patient from Standby Mode
• Sidebar Button
• Troubleshooting
5.5.1 Accessing the Standby Tab
1. From the menu bar, select the Patient Setup menu button. The tabs associated with
patient setup is displayed.
2. Select the Standby tab (FIGURE 5-23). The Standby tab is displayed.
FIGURE 5-23 Standby Tab
5.5.2 Placing a Patient in Standby Mode
This section outlines placing a patient in Standby mode from the Panorama Central Station.
For information on placing a patient in Standby mode from a monitoring device refer to the
Operating Instructions for that device.
1. Choose a patient tile by selecting its digital data or waveform area.