User's Manual

Introduction Patient Reports
6 - 6 0070-10-0678-01 NetGuard™ Operating Instructions
6.1.5 Printing the Patient Report
To print a Patient Report from the NetGuard Monitor view, access the System Print Options
form (shown in FIGURE 6-4).
1. In the NetGuard Monitor view, click the Print button.
FIGURE 6-4 System Print Options Form
2. In the System Print Options form, select either Current Monitor Group or Selected
Monitor Group.
3. Select an event time. The choices are:
4. Optional - select the Include Technical Alarms checkbox to have the technical
alarms included in the Event History section of the report.
5. Optional - select the Preview button to view the report before it is printed.
6. Optional - select the Setup button to change the printer settings (for example, number of
copies or page orientation).
7. Click the OK button to print the report to the default terminal printer.
EVENT TIME OPTIONS DESCRIPTION
Since Admission
Based on the most recent admit date. This is the
default Event Time selected.
Since Transfer
If there were multiple transfers, the system
generates the report based on the most recent
transfer date.
Since Last
Use the up and down arrows to select a time or
enter a maximum of 24 hours.
Date-Time Range
The date and time selected must be within the
date/time range the patient was active at the
NetGuard terminal.