User's Manual

NetGuard™ Operating Instructions 0070-10-0678-01 6 - 5
Patient Reports Introduction
6.1.3 Printing the Patient Detail Report
To print a Patient Detail Report from the Patient Detail form, access the Patient Print
Options form (shown in FIGURE 6-3).
FIGURE 6-3 Patient Print Options Form
1. In the Patient Detail form, click the Print button.
2. Follow steps 3-7 in the Patient Report section on page 6-5.
For instructions to access the Patient Detail form, refer to ‘‘Patient Detail Form’’ on page 5-4.
6.1.4 Patient Report
The Patient Report can be generated for a single registered patient, a single Monitor Group,
or multiple Monitor Groups on the NetGuard system. The format of this report is identical to
the Patient Detail Report except that it can contain historical information for multiple patient’s.
The Patient Report is generated from the NetGuard Monitor view.
Use the available report parameters such as patient’s history since their admission date, most
recent transfer date, a configured number of monitored hours, or a specified date range to
refine the report output. If the report is being generated for a Monitor Group or groups, the
same Date-Time range will be used for all the patient’s in the group.