User's Manual

NetGuard™ Operating Instructions 0070-10-0678-01 5 - 11
Operations Introduction
8. Select the Yes button in the confirmation dialog box.
The patient is now assigned to the new room.
9. Optional - select the Close View button to close the form and return to the NetGuard
Monitor view.
NOTE: For alternative steps to transferring a patient, refer to
“Accessing Monitor View Quick Menus” on page 5-15.
5.1.6.2 Transferring Patient’s to a New Monitor Group
To transfer a patient to a new Monitor Group:
NOTE: Patient’s can be transferred to any Monitor Group in the
NetGuard system, even if the NetGuard terminal initiating
the transfer does not have access to the new Monitor Group.
1. In the NetGuard Monitor view, select the applicable Monitor Group tab.
2. Select the patient’s bed.
3. In the Patient Detail form, select the Menu button.
4. In the Patient Menu form, select the Transfer button.
5. In the Transfer Patient form, select the radio button labeled To Different Monitor
Group.
6. Select the patient’s destination Monitor Group tab.
7. Select the OK button.
8. Select the Yes button in the confirmation dialog box.
The patient is transferred to the Waiting Patient’s tile in the new Monitor Group.
9. If the patient has been transferred to a Monitor Group that is accessible at the NetGuard
terminal, follow the steps in the ‘‘Transferring Patient’s within a Monitor Group’’ on page
5-10 to transfer the patient to an available bed in the new Monitor Group.
If the patient has been transferred to a Monitor Group that is not accessible from the
NetGuard terminal, the transfer process must be completed at a terminal that can access
the new Monitor Group.
NOTE: For alternative steps to transferring a patient, refer to
“Accessing Monitor View Quick Menus” on page 5-15.