User's Manual

NetGuard™ Operating Instructions 0070-10-0678-01 4 - 7
Getting Started Monitor Application
FIGURE 4-6 Patient Level Alarm Tile Components
NOTE: The primary difference between FIGURE 4-5 and FIGURE 4-6
is that the Patient Level alarm window contains a DEFER
button and the System Level alarm window does not.
Heart Rate Indicator
The Heart Rate Indicator (shown in FIGURE 4-7) displays a current heart rate value (if it is
available) for the patient and an elapsed time since the alarm was triggered. It also contains
an Elapsed Time indicator, an ECG button, and may include a Mute Indicator if the alarm
MUTE button was selected.
NOTE: If no heart rate is detected, is unavailable, or is out of
range, the Heart Rate Indicator will display two dashed (--)
lines instead of showing a heart rate value.
FIGURE 4-7 Heart Rate Indicator
Event Name
Patient Name
Room Name
Bed Number
Heart Rate
Indicator
Patient Level
Alarm Window
Buttons
Alarm Priority Indicator
Elapsed Time Indicator
Heart Rate Value
ECG Button
Mute Indicator