User's Manual

Monitor Application Getting Started
4 - 6 0070-10-0678-01 NetGuard™ Operating Instructions
Frame Region
The Frame Region surrounds the Primary Alarm window and displays the Datascope logo,
the current date and time, and the product logo.
Alarm Tile List
The Alarm Tile list displays the alarms in highest to lowest priority. For example, if there was
a Patient level heart rate alarm in progress and the system calls a V-Fib for another patient,
the alarm tile list would display the V-Fib first followed by the Patient level heart rate alarm
because the V-Fib alarm is a higher priority alarm.The Alarm Tile list scales the alarm tile to fit
in the application window. In the event that there are more than six (6) alarms in the Primary
Alarm window, a vertical scroll bar is displayed.
4.3.2.2 Primary Alarm Window Tile Components
The components of the Primary Alarm window are shown in FIGURE 4-2. Each tile displays
the following information:
NOTE: The Patient ID (which is not shown in FIGURE 4-5) replaces
the patient name if it was not entered in the Admit form.
FIGURE 4-5 System Level Alarm Tile Components
• event name • patient name (optional) • alarm priority indicator
• room name • heart rate indicator
• bed number • window buttons
Event Name
Patient Name
Room Name
Bed Number
Heart Rate
Indicator
System Level
Alarm Window
Buttons
Alarm Priority Indicator