User's Manual

Monitor Application Getting Started
4 - 4 0070-10-0678-01 NetGuard™ Operating Instructions
4.3.1.3 Waiting Indicator
The Waiting Indicator group displays bed status indicator symbols for admitted patient’s who
are being transferred and are awaiting a bed assignment. During a patient transfer, the
patient is removed from its Room Status Indicator and temporarily placed in the Waiting
Indicator group (shown in FIGURE 4-2). The Waiting Indicator is only displayed when the
selected Monitor Group has patient’s awaiting a bed assignment. The title of the Waiting
Indicator may be customized and is established by the NetGuard System Administrator
during system setup.
For additional information regarding patient transfers, refer to ‘‘Transferring Patient’s within
a Monitor Group’’ on page 5-10.
4.3.1.4 Print Button
The Print button can be used to generate patient reports. For additional information, refer to
Chapter 6.
4.3.1.5 Help Tab
The Help tab contains a Help and an About button. Selecting the Help tab launches an
Adobe Reader file (using a .pdf format) of the NetGuard Operating Instructions. Selecting the
About button opens a dialog box which contains the application name and version.
COLOR INDICATES
Red System or Patient level physiological alarm
NOTE: Patient level alarms may also display in
yellow if configured by the NetGuard
System Administrator.
Yellow NetGuard System Administrator has configured Patient Level alarms to display in
yellow
Black Unmonitored or empty bed
Gray Patient is in the Standby mode
Green Patient is active, is not in an alarm state, and not in Standby mode
Blue A technical alarm is in progress or the device is not active