User's Manual

Monitor Application Getting Started
4 - 2 0070-10-0678-01 NetGuard™ Operating Instructions
4.3 Monitor Application
The Monitor Application consists of the NetGuard Monitor view and an Alarm Alert view.
The NetGuard Monitor view organizes patient’s into groups and displays their current alarm
status. The Alarm Alert view displays system level and patient level alarm notifications.
For additional information regarding alarm notification, refer to the NetGuard Alarms
chapter.
WARNING: To adequately display the software application, it is
important to maintain a minimum screen resolution of
1024x768.
4.3.1 NetGuard Monitor View
The NetGuard Monitor view (shown in FIGURE 4-2) is the main application screen and will
be shown when there are no active physiological alarms. The standard Microsoft
®
Windows
Minimize, Restore, and Close buttons are displayed in the upper right corner of the screen.
FIGURE 4-2 NetGuard Monitor View
The NetGuard Monitor view provides an overview and status for all the rooms configured at
a NetGuard terminal. This view can display from one (1) to five (5) tabs (referred to as
Monitor Groups) and can contain a total of 50 patient beds per terminal.
Monitor Group Tabs
Help Tab
Room Status Indicator
Patient Status Indicators
Waiting Indicator
Monitor Group Page Print Button