User Guide

13
MindPrint
®
DI-MOD USB
5. Technical Data
All levels are referenced to 0 dBV (1V RMS ) and were
measured using the Rhode & Schwarz UPL Audio
Analyzer.
Analog Inputs
Analog In A+B:
Type: 16-pin SEK-18 port (PIN 1
and PIN 3), unbalanced
Input impedance: 18 kohms
Peak input level: + 4.2 V (14.7 dBu, 12.5 dBV)
Analog Outputs
D/A Out A+B:
Type: 16-pin SEK-18 port (PIN 5
and PIN 7), unbalanced 1/4“
stereo (Freering/tip-to-
channel assignment)
Output type: unbalanced
Output impedance: 22 ohms
Peak output level: + 4.2 V (14.7 dBu, 12.5 dBV)
Digital Output
(compliant with IEC 958)
S/PDIF:
Electrical connector type: RCA phono Output
type: unbalanced, transformer
isolated
Output impedance: 75 ohms
Peak output level: 500 mV
Data format: S/PDIF
USB IN/OUT:
Connector: Standart USB Series "B" plug
(downstream towards the
USB Device)
Format: USB 1
Sampling frequencies: 32-105 kHz
Dynamic Range: 110 dB (A-rated) 1kHz sine
@ -0.1 dBFS
General Electrical Data:
Max. current draw: 243 mA at 22.2 VAC
Max. power consumption: 5.3 VA
General Mechanical Data:
Dimensions:
Width: 105 mm
Height: 33 mm,
Weight: 290g
D_1094_Di Mod USB BDA D/E 1.1 15.06.2004 12:24 Uhr Seite 13