Datasheet

Page 10-4 Sales: 763-571-3121 ¨ Fax: [phone] ¨ www.minco.com Minco Bulletin TS-103(A)
Thermal-Ribbons
Thermal-Ribbons
Thermal-
Ribbons
Strip Sensing Thermal-Ribbons
These models average temperatures along their length to eliminate point measurement errors. Wrap them around cylinders or
adhere them to flat surfaces.
Dimensions
W×L×T(max.)
Element
options
Insulation Temp.
range
Leadwires Time
constant*
Features Model
0.375 × 4.00 × 0.075"
(9.5 × 101.6 × 1.9 mm)
PB22
Silicone
rubber with
Kapton
backing
-62 to 220°C
-80 to 428°F
AWG 26,
PTFE insulated
0.6 sec.
Platinum PD
accuracy
S34
PD12, PE22 S386
0.375 × 4.00 × 0.065"
(9.5 × 101.6 × 1.7 mm)
FA Kapton
-200 to 200°C
-328 to 392°F
0.2 sec.
Wire-wound
nickel-iron for
high resistance,
thin element
S35
FA Mylar
-100 to 150°C
-148 to 302°F
0.3 sec.
Wire-wound
nickel-iron,
low cost
S2
0.50 × 1.25 × 0.050"
(12.7 × 31.8 × 1.3 mm
PA, PE,
CA, NA
Kapton
-73 to 200°C
-100 to 392°F
0.17 sec.
Easy motor
installations
S3238
* In water at 1 m/sec.
Sensing element specifications** Code
Platinum 392, 100 W ±0.5% at 0°C PA
Platinum 391, 100 W ±0.22% at 0°C PB22
Platinum 385, 100 W ±0.12% at 0°C (EN60751, Class B) PD12
Platinum 385, 100 W ±0.5% at 0°C PE
Platinum 385, 100 W ±0.22% at 0°C PE22
Nickel-iron 518, 604 W ±0.26% at 0°C FA
Copper 427, 10 W ±0.20% at 25°C CA
Nickel 672, 120 W ±0.3% at 0°C NA
** See table for element options on each model.
How to order
S34 Model number from table (except S3238)
PB22 Sensing element from table at top
Y Number of leads:
Y = 2 leads
Z = 3 leads (required on CA)
X = 4 leads (PD only)
36 Lead length in inches:
36" stocked (42" on S2)
A Adhesive backing:
A = No adhesive
B = Pressure-sensitive adhesive (PSA)
S34PB22Y36A ¬ Sample P/N
Model S3238
Model S3238 is specially designed to sense stator temperatures
in motors and generators. An alternative to the “stick” sensors
in Section 8, the S3238 mounts on the end turns of stator
windings and provides an easy way to add overtemperature
protection when the stator is not being rewound.
How to order
S3238 Model number S3238
PA Sensing element from table above
Y Number of leads:
Y = 2 leads
Z = 3 leads (required on CA)
X = 4 leads
T Lead insulation:
T = PTFE
K = polyimide
TS = SS braid over PTFE
36 Lead length in inches
36" stocked
U Lead configuration:
T = Twisted
U = Untwisted
A Adhesive backing:
A = No adhesive
B = Pressure-sensitive adhesive (PSA)
S3238PAYT36UA ¬ Sample P/N
 PSA reduces temperature range to -20 to 177°C (-4 to 350°F) and adds 0.005" (0.1 mm) to thickness.
IN STOCK
All models in stock with 36" leads,
except 42" leads on S2FA