Datasheet

Page 10-4
|
Specifications subject to change
Discoil™ Thermal-Ribbons
Dimensions
W x L x T
max
Element
options
Insulation Temperature
range
Leadwires Time
constant*
Features Model
0.79 x 1.87 x 0.055"
(20 x 47.5 x 1.4 mm)
solder pad version shown
PD, PE
Polyimide
(clear
polyester
available)
-73 to 200°C
-100 to 392°F
(Optional) AWG
24, PTFE insu-
lated
0.10 sec.
Only 0.010" thick
over element, fast
time response, plat-
inum PD accuracy
available
S17422
1.00 x 1.25 x 0.090"
(25.4 x 31.8 x 2.3 mm)
PB11, PB22
Silicone
rubber with
polyimide
backing
-62 to 220°C
-80 to 428°F
AWG 24,
silicone rubber
insulated
0.2 sec.
High temperature
rating, platinum PD
accuracy available
S32
PD12, PE22
S385
1.00 x 1.25 x 0.065"
(25.4 x 31.8 x 1.7 mm)
FA Polyimide
-200 to 200°C
-328 to 392°F
AWG 26,
PTFE insulated
0.15 sec.
High resistance
nickel-iron element
S39
Overview
Install these compact sensors anywhere for accurate point
sensing. Discoil™ RTD elements are wound on a single plane for
faster time response.
Specifications
Notes: T
max
is measured over the lead bulge.
*Time constant is in water at 1 m/sec.
Sensing elements
** See table above for element options on each model.
Specification and order options
Notes: PSA reduces temperature range to -20 to 177°C
(-4 to 350°F) and adds 0.005" (0.1 mm) to thickness.
Sensing element specifications** Code
Platinum (0.00391 TCR) 100 Ω ±0.11% at 0°C
PB11
Platinum (0.00391 TCR) 100 Ω ±0.22% at 0°C
PB22
Platinum (0.00385 TCR) 100 Ω ±0.12% at 0°C
(EN60751, Class B)
PD, PD12
Platinum (0.00385 TCR) 100 Ω ±0.36% at 0°C
PE
Platinum (0.00385 TCR) 100 Ω ±0.22% at 0°C
PE22
Nickel-iron (0.00518 TCR) 604 Ω ±0.26% at 0°C
FA
S32
Model number from table
PB22
Sensing element from table
Z
Number of leads:
Y = 2 leads
Z = 3 leads
X = 4 leads
W = Solder pads (S17422 only)
36
Lead length in inches
(Specify 0 for solder pads, option on S17422 only)
A
Adhesive backing:
A = No adhesive
B = Pressure-sensitive adhesive (PSA)
S32PB22Z36A = Sample part number
Specify and order products at:
www.minco.com/sensors_config