Datasheet

Page 10-2
|
Specifications subject to change
Thermal- Tab™ and Therma l-Ribbon™ Sensors
Dimensions
W x L x T
max
Element
options
Insulation Temperature
range
Leadwires Time
constant*
Features Model
0.20 x 0.50 x 0.08"
(5 x 12 x 2 mm)
PD, PF, PW
Polyimide with
elastomer cover coat
-50 to 155°C
-58 to 311°F
AWG 26,
PTFE insulated
0.8 sec.
Stocked for
immediate shipment
S665
0.20 x 0.60 x 0.08"
(5 x 15 x 2 mm)
PD, PF, PW,
PS, NB, NA,
NJ
Polyimide
-50 to 200°C
-58 to 392°F
AWG 26, PTFE
or polyimide
insulated
1.0 sec.
Platinum
models in stock
S17624
0.20 x 0.60 x 0.08"
(5 x 15 x 2 mm)
PD, PF, PW,
PS
Polyimide film
-50 to 260°C
-58 to 500°F
AWG 26, PTFE
or polyimide
insulated
0.4 sec.
Highest temperature
capability
S100820
0.20 x 0.60 x 0.12"
(5 x 15 x 3 mm)
PD, PF, PW
Silicone rubber with
elastomer cover and
foil backing
-50 to 155°C
-58 to 311°F
AWG 24,
Silicone
insulated
1.3 sec.
Waterproof; suitable
for continuous
immersion
S667
0.20 x 0.60 x 0.045"
(5 x 15 x 1.15 mm)
PD, PF, PW Polyimide film
-50 to 200°C
-58 to 392°F
AWG 26, PTFE
or polyimide
insulated
0.6 sec. Thinnest profile S100725
0.30 x 0.60 x 0.10"
(7 x 15 x 2.5 mm)
PD, PF, PW,
PS, NB, NA,
NJ
Polyimide film
-50 to 200°C
-58 to 392°F
AWG 22, PTFE
or polyimide
insulated
1.2 sec.
Heavier leadwire for
applications requiring
ruggedized design
S100724
0.40 x 0.80 x 0.08"
(10 x 20 x 2 mm)
PD, PF, PW,
PS, NB, NA,
NJ
Polyimide film
-50 to 200°C
-58 to 392°F
AWG 26, PTFE
or polyimide
insulated
0.9 sec.
Larger surface area
for easier handling
and maximum
adhesive bond
S100723
0.40 x 0.80 x 0.08"
(10 x 20 x 2 mm)
PD, PF, PW,
PS, NB, NA,
NJ
Silicone rubber
-50 to 220°C
-58 to 428°F
AWG 26, PTFE
or polyimide
insulated
1.5 sec.
High temperature
rating, available with
wide range of ele-
ment options
S100721
Install these compact sensors anywhere for accurate point sens-
ing and fast response. All Thermal-Tab modules use a thin-film
RTD element. All Thermal-Ribbon models conform to EN60751
Class B tolerance when ordered with a PD platinum element.
• Fast response surface sensing in aerospace, medical and
industrial devices
• Rugged lamination construction
• Polyimide, silicone rubber or Mylar™ insulation
Notes: T
max
is measured over the lead bulge.
*Time constant is in water at 1 m/sec.
Thermal-Tab Specifications
0.20 x 1.50 x 0.030"
(5.1 x 38.1 x 0.8 mm)
FA Polyimide
-200 to 200°C
-328 to 392°F
AWG 34,
PTFE insulated
0.15 sec.
Wire-wound
nickel-iron for
high resistance
in small package
S38
0.30 x 0.30 x 0.025"
(7.6 x 7.6 x 0.7 mm)
PD, PE
Polyimide with foil
backing
-200 to 200°C
-328 to 392°F
AWG 28,
PTFE insulated
0.15 sec.
Wire-wound
element
S651
0.75 x 0.75 x 0.04"
(19 x 19 x 1.0 mm
FA Mylar
-200 to 150°C
-328 to 302°F
AWG 30,
PTFE insulated
0.3 sec.
Wire-wound
nickel-iron flat
element for high
resistance
S25
Thermal-Ribbon Specifications