Datasheet

Minco Bulletin TS-103 Order Desk: 763-571-3123 ¨ Fax: [phone] ¨ www.minco.com Page 11-3
Elements
Elements
Elements
850°C Precision Elements
Dimensions in inches (mm) Leads Response time in seconds Self-Heating
Water, 1 m/s
°C/mW
Model
Water, 0.4 m/s Air, 1.5 m/s
50% 90% 50% 90%
0.047 ø
(1.2) 0.59 (15) 0.4 (10)
0.006" (0.15 mm) ø
Platinum
Resistance:
0.0055 W/mm/lead
0.06 0.15 3.5 12.5 0.100 S270*
0.98 (25) 0.6 (15)
0.07 0.20 6.0 20.0 0.040 S271*
0.062 ø
(1.6) 0.59 (15) 0.4 (10)
0.010" (0.25 mm) ø
Platinum
Resistance:
0.002 W/mm/lead
0.07 0.30 6.6 25.4 0.029 S272
0.98 (25) 0.6 (15)
0.08 0.35 7.0 25.0 0.020 S273
0.079 ø
(2.0) 0.59 (15) 0.4 (10)
0.08 0.35 7.0 24.0 0.012 S274
0.98 (25) 0.6 (15)
0.09 0.45 7.5 25.3 0.008 S275
0.110 ø
(2.8) 0.59 (15) 0.4 (10)
0.13 0.55 9.3 30.0 0.014 S276
0.98 (25) 0.6 (15)
0.16 0.70 10.5 34.1 0.011 S277
0.155 ø
(3.9) 0.59 (15) 0.4 (10)
0.014" (0.36 mm) ø
Platinum
Resistance:
0.001 W/mm/lead
0.29 1.24 14.3 43.3 0.011 S278
0.98 (25) 0.6 (15)
0.35 1.55 16.0 48.0 0.010 S279
0.177 ø
(4.5) 0.59 (15) 0.4 (10)
0.31 1.50 17.0 51.0 0.012 S280
0.98 (25) 0.6 (15)
0.41 1.60 18.0 54.0 0.008 S281
0.188 ø
(4.8) 0.59 (15) 0.4 (10)
0.32 1.58 17.3 52.1 0.012 S282
0.98 (25) 0.6 (15)
0.43 1.65 18.4 54.8 0.008 S283
*Not available with factory installed extension leads AC887/AC888/AC889/AC101828
Obtain accurate measurements over a
wide temperature range. A proprietary fill
material supports the element wire
without straining it, giving exceptional
resistance to shock, vibration, and
temperature-induced hysteresis.
Specifications
Element: Platinum, 100 W at 0°C,
TCR = 0.00385 W/W/°C.
Tolerance: EN60751 Class A (± 0.06%) or
Class B (± 0.12%). Calibrated 1 mm from ends
of leads.
Temperature range: -200 to 850°C (-328 to
1562°F).
Diameter tolerance: ±0.005" (0.13 mm).
Length tolerance: ±0.06" (1.5 mm).
Repeatability: Meet IEC requirements. Typical
shift less than 0.05°C (0.02 W) at 0°C after ten
cycles from -200 to 850°C.
Stability: Meet IEC stability specifications after 250
hours exposure to extremes of temperature range.
Typical drift is less than 0.05°C (0.02 W) at 0°C.
Vibration: Will withstand 10 to 5000 Hz at 2 G’s.
minimum.
Shock: Will withstand 250 mm drop onto 8 mm
thick steel plate (approximately 1400 G’s for
0.08 ms).
Immersion: Elements are not hermetically sealed.
How to Order 850°C Elements
S276 Model number from table
PD 100 W Platinum, 0.00385 TCR
12 Tolerance at 0°C:
06 = ±0.06%, EN60751 Class A
12 = ±0.12%, EN60751 Class B
Other tolerances are available
S276PD12 ¬ Sample P/N
IN STOCK
All models