Datasheet

Page 11-2 Sales: 763-571-3121 ¨ Fax: [phone] ¨ www.minco.com Minco Bulletin TS-103
Elements
Elements
Elements
Wire-Wound and Thin-Film Elements
Dimensions in inches (mm) R (0°C) Temperature
range
Leads Model
550°C wire-wound elements
0.040 ø
(1.020) 0.45 (11.4) 0.75 (19)
100 W
-20 to 550°C
(-4 to 1022°F)
0.006" (0.15 mm) ø
Platinum
S200PD
0.058 ø
(1.47) 0.40 (10.2) 0.75 (19)
-100 to 550°C
(-148 to 1022°F)
0.010" (0.25 mm) ø
Platinum alloy
S201PD
0.077 ø
(1.96) 0.30 (7.6) 0.75 (19)
S202PD
0.100 ø
(2.54) 0.40 (10.2) 0.75 (19)
0.014" (0.35 mm) ø
Platinum alloy
S203PD
0.135 ø
(3.43) 0.40 (10.2) 0.75 (19)
0.014" (0.35 mm) ø
Platinum
S204PD
0.077 ø
(1.96) 1.00 (25.4) 0.75 (19)
500 W
0.010" (0.25 mm) ø
Platinum alloy
S212PG
0.135 ø
(3.43) 1.20 (30.5) 0.75 (19)
0.014" (0.35 mm) ø
Platinum
S214PG
400°C and 600°C thin-film elements
0.05 (1.3) 0.025 (0.7) THICK
0.07 (1.7) Lead length: 0.4 (10)
100 W
-50 to 400°C
(-58 to 752°F)
0.010" (0.25 mm) ø Ag
.0004 W/mm/lead
S100144PD12
1,000 W S101503PF12
0.08 (2.0) 0.055 (1.4) THICK
0.09 (2.3) Lead length
S245: 0.6 (15)
S249: 0.4 (10)
100 W
-70 to 400°C
(-94 to 752°F)
0.010" (0.25 mm) ø Ag
.0004 W/mm/lead
S245PD12
-70 to 600°C
(-94 to 1112°F)
0.008" (0.20 mm) ø Pt/Ni
0.003 W/mm/lead
S249PD12
0.08 (2.0) 0.055 (1.4) THICK
0.20 (5.0) Lead length
S247: 0.6 (15)
S251: 0.4 (10)
1,000 W
-70 to 400°C
(-94 to 752°F)
0.010" (0.25 mm) ø Ag
.0004 W/mm/lead
S247PF12
-70 to 600°C
(-94 to 1112°F)
0.008" (0.20 mm) ø Pt/Ni
0.003 W/mm/lead
S251PF12
0.10 (2.5) 0.050 (1.3) THICK
0.20 (5.0) Lead length: 0.6 (15)
10,000 W
-50 to 400°C
(-58 to 752°F)
0.010" (0.25 mm) ø Ag
.0004 W/mm/lead
S19827PS12
Other standard models:
• Class A tolerance = ±0.15°C at 0°C
• R(0°C) = 500 W
• Dimensions: 1.6×5mm,2×10mm
• Nickel, TCR = 0.00618 W/W/°C, -50 to 150°C
Custom models:
• Special dimensions or shapes
• Longer leadwires (to 100 mm)
• Insulated extension leads (see page 11-4)
• Special R(0°C), TCR, or tolerance
550°C wire-wound elements
Use these elements for general purpose
sensing in probes or equipment. PD
models meet EN60751, Class B.
Order by model number.
Temperature range: See table above. Some
elements may be used down to -269°C in certain
applications. Contact factory for advice on
cryogenic use.
Material: Glass-coated ceramic.
Tolerance: ±0.1% at 0°C.
TCR:
0.00385 W /W/°C. Models with 0.00391
TCR, the U.S. industrial standard, are: S201PB,
S202PB, S203PB, S204PB, S212PP, S214PP.
All 0.00391 TCR models use 0.010" (0.25 mm)
diameter 0.5" (13mm) long platinum leads.
Diameter tolerance: ±0.005" (0.13 mm).
Length tolerance: ±0.06" (1.5 mm).
Repeatability: ±0.1°C or better.
Stability: Drift less than 0.1°C/year in normal
use.
Vibration: Withstands 20 G’s minimum at 10 to
2,000 Hz.
Shock: Withstands 100 G’s minimum sine wave
shock of 8 milliseconds duration.
Thin-film elements
Thin film elements offer low cost and
resistances to 10k W. See page 10-2 for
the S17624 thin-film Thermal-Ribbon™.
Order by model number.
Optional Class A tolerance: Change 12 to 06 for
±0.06% (EN60751 Class A). Not available with
S19827PS.
Material: Aluminum oxide substrate with fused
glass cover.
Dimensional tolerance: ±0.02" (0.5 mm).
Repeatability: ±0.1°C or better.
Stability: Drift less than 0.1°C/year in normal
use.
Vibration: Withstands 20 G’s minimum at 10 to
2,000 Hz.
Shock: Withstands 100 G’s minimum sine wave
shock of 8 milliseconds duration.
IN STOCK
All 0.00385 TCR models