User Manual

38
Contact us today | Tel [phone] | minco.com
Heater Accessories
Select Thermostats and Insulators for your heaters
Thermostats
Thermostats provide basic heater control at little cost. You can
also use them as thermal cutoffs in conjunction with other
control systems. All thermostats come with a 1.5” (38.1 mm)
long, silicone rubber coated sleeve for electrical insulation
(case is electrically live), and mounting adhesive.
These thermostats are ordered separately. For information on
ordering heaters with factory installed thermostats contact
Access: Minco Sales and Support.
Specifications
Stock models:
TH100 creep action, 120 VAC maximum.
TH200 snap action, 240 VAC maximum.
Setpoint tolerance: ±5°C (±9°F).
Contact configuration: Normally open
(NO) above setpoint.
Open/close differential: 5 to 10°C, typical.
Maximum current:
Model TH100: 6 amps at 120 VAC;
8 amps at 12 VDC;
4 amps at 24 VDC.
Model TH200: 4 amps at 240 VAC.
Life rating: 100,000 cycles.
Approvals: UL, CSA.
Specification options
TH200
Model number: TH100 (creep action)
T80
Setpoint options in °C (°F):
60 (140), 80 (176), 100 (212), 150 (302)
TH200T80 = Sample part number
TH100
Model number: TH100 (creep action)
T40
Setpoint options in °C (°F):
5 (41), 20 (68), 40 (104), 60 (140), 80 (176),
100 (212), 150 (302), 200 (392)
TH100T40 = Sample part number
0.27" (6.86 mm)
TH100
Max. thickness = 0.22" (5.59 mm)
Leadwire: AWG 22
Dimensions do not include insulating sleeve
1.26" (32.0 mm)
12.0" (304.8 mm)
TH200
Max. thickness = 0.18" (4.57 mm)
Leadwire: AWG 22
Dimensions do not include insulating sleeve
0.42" (10.67 mm
)
0.93" (23.62 mm)
12.0"
(304.8 mm)