User Manual

Notes for Stock Heaters

• Heated area is within the X and Y dimensions

• Resistance tolerance is +/- 10% or +/- 0.5Ω, whichever is

greater

• Standard leadwire length is 12” (305mm) minimum

• Mounting: acrylic PSA applied on entire substrate

area

Sized (inches) Size (mm) Type Resistance

(Ω)

Typical power Effective area Lead

AWG

Model

number

X Y X Y Watts Volts in² cm²

0.58 2.20 14.60 55.90 1 89.4 1.6 12 0.80 5.13 30 H6985

0.75 4.00 19.10 101.60 1 22.0 6.5 12 2.35 15.16 30 H6986

0.90 5.75 22.90 146.00 1 14.1 10.2 12 4.29 27.68 30 H6987

1.10 4.40 27.90 111.80 1 30.0 19.2 24 4.09 26.39 30 H6988

1.20 3.65 30.50 92.70 1 101.0 7.8 28 3.71 23.94 30 H6989

2.90 5.75 73.70 146.00 1 9.6 60.0 24 15.55 100.32 30 H6990

4.00 5.00 101.60 127.00 1 31.2 41.5 36 18.83 121.48 30 H6991

0.60 2.35 15.24 59.69 1 240.0 2.4 24 0.95 6.13 30 H6992

0.60 2.85 15.24 72.39 1 192.0 3.0 24 1.19 7.68 30 H6993

1.00 3.35 25.40 85.09 1 96.0 6.0 24 2.62 16.90 30 H6994

Stock Thermal-Clear Transparent Heaters

Buy online at Minco.com

12"

(300 mm)

MAX. THICKNESS

OVER ELEMENT:

0.010" (0.25 mm)

OVER LEADS:

0.070" (1.8 mm)

DIMENSIONAL

TOLERANCE:

6" (150 mm) or less:

6.01 - 12" (150 - 300 mm):

±0.03" (±0.8 mm)

±0.06" (±1.5 mm)

MAX. LEAD BULGE:

0.42" WIDE x 0.35" DEEP

(11 X 9 mm)