User Manual

Stock Polyimide Thermofoil Heaters

Buy online at Minco.com

Sized (inches) Size (mm)

Type

Resistance

(Ω)

Typical power Effective area

Lead AWG

Model

number

X Y X Y Watts Volts in² cm²

0.50 1.00 12.7 25.4 21 210.1 4 28 0.37 0.24 26 HK6900

0.50 2.00 12.7 50.8 30 100.1 8 28 0.78 0.51 26 HK6901

0.50 3.00 12.7 76.2 21 65.7 12 28 1.19 0.77 26 HK6902

0.50 4.00 12.7 101.6 21 48.9 16 28 1.60 1.03 26 HK6903

0.50 5.00 12.7 127.0 21 38.9 20 28 2.01 1.30 26 HK6904

0.50 10.00 12.7 254.0 21 19.3 41 28 4.06 2.62 26 HK6905

1.00 1.00 25.4 25.4 21 94.7 8 28 0.83 0.53 26 HK6906

1.00 2.00 25.4 50.8 1 47.8 16 28 1.64 1.06 26 HK6907

1.00 3.00 25.4 76.2 1 32.1 24 28 2.44 1.58 26 HK6908

1.00 4.00 25.4 101.6 1 23.6 33 28 3.32 2.14 26 HK6909

1.00 5.00 25.4 127.0 1 18.7 42 28 4.20 2.71 26 HK6910

2.00 2.00 50.8 50.8 1 22.1 36 28 3.55 2.29 26 HK6911

2.00 3.00 50.8 76.2 1 14.7 53 28 5.32 3.43 26 HK6912

2.00 4.00 50.8 101.6 1 187.6 70 115 7.05 4.55 22 HK6913

2.00 5.00 50.8 127.0 1 157.1 84 115 8.42 5.43 22 HK6914

Notes for Stock Heaters

• Heated area is within the X and Y dimensions

• Voltage and wattage values are for reference only

• Resistance tolerance is +/- 10% or +/- 0.5Ω, whichever is

greater

• Heaters may be operated at other voltages if they do not

exceed the maximum allowable watt density ratings

• Thermoset acrylic internal adhesive (not UL recognized)

• Standard leadwire length is 12” (305 mm) minimum

• Type 21 configurations have lead connections on an

external tab, which produces negligible heat, in most

cases, does not need to be adhered to the heat sink

678

UNHEAT ED TAB:

AWG30: 0.40" long × 0.25"wide (10.2×6.4 mm)

AWG26: 0.40" ×0.40" (10.2 × 10.2 mm)

30 31

TAB DIMENSIONS:

AWG 30: 0.40" long × 0.25" wide (10.2 × 6.4 mm)

AWG 24/26: 0.40" × 0.40" (10.2 × 10.2 mm)