User's Manual

Product Requirement Specification
Mimosa Confidential Page 23
Closed Network
Option to hide SSID, configurable per
SSID
Guest SSID
ʔ
Option to make an SSID a Guest SSID
Create Guest SSID as WPA/WPA2 with
default (no captive portal)
Default SSID = GuestXYZ
(last 3 digits of serial number)
WPA passphrase = guestXYZ (last 3
digits of serial number)
Allow option to enable client isolation to
only allow Guest Wi-Fi traffic to go to
internet (WAN)
Range Extender (repeater)
Site Survey
Site Survey Mode to discover SSIDs and
display. User will select SSID and enter
security credentials to repeat. Display
SSID, Signal Strength, Security mode
(None, WPA-PSK, WPA2-PSK, WEP).
Allow selection of SSID, Entry of
Encryption Key to enable repeating.
Security Authentication
WPA/WPA2 Personal (PSK)
WPA/WPA2 Enterprise 802.1X
Authentication with RADIUS Client
Enterprise (802.1x): PEAP, TTLS, TLS
Encryption
AES, TKIP, WEP 64/128
Certification Wi-Fi Alliance Wi-Fi Certified only for mandatory items
Router Function
for Ethernet as
WAN
NAT router
Support to enable/disable
SPI Firewall
Stateful Firewall to allow traffic session
back through NAT router
NAT Port Forwarding
(WAN to LAN)
Action: Allow, Block
Source IP (Any, Single IP, Range of IP)
Destination IP (Single IP)
Internal Port (Single Port, range 1-
65535)