User's Manual

Product Requirement Specification
Mimosa Confidential Page 22
ʔ
Router and auto-configured as Wi-Fi
Extension. I.e.: Plug is once to configure
as Wi-Fi Extension and then power on
again w/out connecting to main router.
Configured manually via GUI
Enable Wi-Fi as repeater
WAN Router (NAT/DHCP) OFF
Bridge traffic to LAN if connected
Bridge traffic to the main Wi-Fi router
ʔ
Wireless Extension and Repeater Use Case (diagram 2)
This table describes the minimum viable feature set for the PoE Wi-Fi Router.
Wireless Wireless mode 802.11bgn
Bandwidth
20MHz
40 MHz (deny 20 MHz clients)
20/40MHz dynamic
Aggregation in 11n mode
A-MPDU
SSID
Support 4 virtual AP
PowerSave
Support WMM-Power Save
QoS
EDCA WMM (WMM QoS)
QoS-DSCP configurable via web UI
Other parameter
configurable via Web UI
Transmit power adjustable (four level:
full, 1/2, 1/4, 1/8)
DTIM
Guard interval (short/long)
Beacon Interval
Channel Setting
Auto via boot time scan – pick channel
with least other SSIDs detected.
Manual Select from channel pick list.