User's Manual

Product Requirement Specification
Mimosa Confidential Page 21
This table describes the four operational modes for the PoE Wi-Fi Router and what functions
are enabled for each mode. How will C5/C5c/C5i be configured?
Mimosa Plug-In POE Wi-Fi Gateway Software specification
Configuration
Modes
Only enable
auto config
mode when
device powered
on with Factory
Defaults
Config can be
changed
manually once
auto config is
done.
PoE Wi-Fi Router
ʔ
Default Mode
Detection: WAN cable plugged in
WAN Router (NAT/DHCP) between WAN
and LAN/Wireless
Bridge traffic between LAN and Wi-Fi
Wi-Fi always in Access Point mode for
Wi-Fi certified 802.11bgn clients
Defaults:
SSID = MimosaXYZ (last 3 digits of
serial number)
WPA-PSK passphrase = mimosaXYZ
(last 3 digits of serial number)
Web GUI password = mimosaXYZ
PoE Pass-through
ʔ
Configure Option from GUI
WAN Router (NAT/DHCP) OFF
Wi-Fi OFF
Bridge all packets from LAN ! WAN
Wi-Fi Extension
ʔ
See Diagram 2
for details
Detection: Only LAN port connected to
WAN router
WAN Router (NAT/DHCP) OFF
Learn SSID configuration from WAN
Router
Enable SSIDs
Pick different Wi-Fi Channel from WAN
Router
Bridge traffic from SSIDs to LAN port
(DHCP/Gateway provided by WAN
Router). Keep Guest traffic separate
from Home Network.
No Router/DHCP function
Wireless always in Access Point mode
for Wi-Fi certified 802.11bgn clients
Range Extender Detection: no LAN connection to main