User's Manual

Device Discovery Traceroute
The Device Discovery displays the Name, Product, Mode and
SSID of any devices on the network that are active in the area.
The Refresh button in the upper right corner will update this
The Traceroute function assumes that the current device you are
logged into is one end of the route.
information to the most current view.
The Download button in the upper right corner will extract this
information into a Device Discovery CSV file.
Ping
Destination
host
Resolve IP
address
Max number of
hops
IP address of end Traceroute device
Determines if the report will contain device names or only
IP addresses. Turning this function Of will lead to slightly
faster results.
Set the maximum number of device hops that a packet will
encounter before ending the traceroute.
Once a traceroute is configured, select the Start button at the top to
execute. If at any point during the traceroute you wish to stop, click the
Stop button at the top right.
Destination IP IP address of the device to ping.
Packet Count Number of packets to transmit.
Packet Size Size of each packet transmit.
After configuring the ping values, press the Start button at the top to execute.
Clicking the Stop button at any point will end the ping.
Tools 16