User's Manual

Mimosa Help Site

Mimosa Networks Help Site Dashboard

Reading Device Details

The Device Details panel shows two summary tables for the local and remote device configurations and their status.󰾬

Additional detail can be found by clicking on the navigation circles at the bottom of the panel.

The table shows the following for both Local and Remote devices:

Device Name: 󰾬The friendly name given to each device. (Set in Preferences > General > Naming)

●

Serial Number: The unique identifier for the device assigned at the factory.

●

IP Address: The IP address of each device and how it was assigned. (Set in Preferences > Management)

●

Wireless Protocol: The MAC level protocol. (Set in Wireless > Link > MAC Configuration)

●

TDMA Traffic Balance: Identifies the "gender" of the radio, the duration for each TDMA time slot, and ratio of

●

bandwidth allocated for transmission. (Set in Wireless > Link > MAC Configuration)

Ethernet Speed: Data rate and duplex mode of the wired Ethernet interface.

●

Firmware: The latest firmware version applied to each device. (Set in Preferences > Update & Reboot)

●

Internal Temp: The measured temperature inside the device.

●

Ethernet MAC: The unique identifier for the physical Ethernet interface.

●

Last Reboot: The date and time at which each device last rebooted.

●