Product Manual
Table Of Contents
- Abbreviations And Acronyms
- 1 Tornado System Overview
- 2 Safety Warnings
- 3 Tornado radio unit overview
- 4 Setting Up on the Bench
- 5 Configuration Control and Monitoring System (CCMS)
- 6 Changing Operating Frequency and Power Calibration
- 7 Duplexer Tuning Guide
- 8 Radio Reference Information
© MiMOMax Wireless Ltd
Tornado Product Manual
26
6.5.5 Calibration fault
Sometimes, the calibration process can fail. This will occur if the PG is out of range at the fine step. The logic checks the
resulting PG against limits and the PG must be inside them for the calibration to pass. On failure of one of the transmitters
the following page will be show:
This will result in failure and user will need to abort by pressing the Abort button.