Product Manual
Table Of Contents
- Abbreviations And Acronyms
- 1 Tornado System Overview
- 2 Safety Warnings
- 3 Tornado radio unit overview
- 4 Setting Up on the Bench
- 5 Configuration Control and Monitoring System (CCMS)
- 6 Changing Operating Frequency and Power Calibration
- 7 Duplexer Tuning Guide
- 8 Radio Reference Information
© MiMOMax Wireless Ltd
Tornado Product Manual
25
6.5.2 Calibrating Tx (Fine Step)
The fine step is where the power is accurately adjusted using the PG (aka Pulse Shaper Gain) - the digital gain and digital
hardware method to control power. Click Calibrate on the following page to apply it,
6.5.3 Complete calibration of one Tx
Pressing Calibrate the 2nd time, finishes the adjustments and if successful, the following screen will be shown:
The user can abort the process at any time while still calibrating one of the Tx's by pressing the Abort button on this screen
or on other process screens. The abort isn't permitted once both transmitters show a green YES on the last screen. This is
one difference between CCMS and CLI which allows abort at any time unless you've already issued a confirm.
6.5.4 Complete both transmitter calibration
The next page shows up when both transmitters were successful in their calibration.