Product Manual
Table Of Contents
- Abbreviations And Acronyms
- 1 Tornado System Overview
- 2 Safety Warnings
- 3 Tornado radio unit overview
- 4 Setting Up on the Bench
- 5 Configuration Control and Monitoring System (CCMS)
- 6 Changing Operating Frequency and Power Calibration
- 7 Duplexer Tuning Guide
- 8 Radio Reference Information
© MiMOMax Wireless Ltd
Tornado Product Manual
17
4 SETTING UP ON THE BENCH
The radio units can be interconnected for bench-based testing or configuration. Attenuators with the appropriate value and
power handling must be used. The
RF Wiring
Diagram shows the interconnection of attenuators, cables and splitters for a standard bench test.
Note: If an NDL system or an MDL system with only one RRU is desired then the splitters, second RRU and corresponding
attenuators can be omitted. MiMOMax can supply a splitter that provides 4 ports and ~30dB attenuation.