User`s manual

|
17
Q No image on screen, I cannot turn on the mimo.
A Is USB cable connected and did you install mimo driver yet? Please run ‘mimo
Installation Software’in the CD. For more detail about driver installation, please refer to
Connections & Installation chapter
Q I cannot turn my mimo screen on.
A Please check if the USB cable is connected.
Touch the mimo’s power button ( ) once then check the screen status.
Please check if ‘mimo Installation Software’has been installed properly.
1. Right-click ‘My Computer’→ click ‘Properties’.
2. Click ‘Device Manager’s at ‘Hardware’tab.
3. Locate the cursor on PC at the top of the system tree.
4. Click ‘Action(A)’→“Add Hardware(A)”.
5. Reboot the PC.
* Normal PC recognize mimo as a generic USB device. Frequent power on and off of the
device may cause USB device error. Please refer to Microsoft customer support for USB
devices’t troubleshooting.
Q mimo screen doesn’t move - stands still.
A Please check mimo screen’s ‘Hardware Acceleration’setting in desktop properties.
Adjust ‘Hardware Acceleration’value as ‘Max’.
1. Right-click on Desktop to and open ‘Display Properties’.
2. Click ‘Setting’→ Choose ‘nanovision Mini Monitor’.
3. Click ‘Advance(V)’.
4. Please check ‘Hardware Acceleration’value as ‘Max’.
Troubleshooting
Before calling for assistance, please read carefully below. If you do need
assistance, please call local service center or contact your dealer.