User manual

MIMO 2x2 Wireless Outdoor Access Point System User Manual
8
1. MIMO 2x2 Wireless Outdoor Access Point System Hardware Feature
1.1 Hardware Outline
Figure 1.Outdoor unit Hardware Outline
Product Features
 Range — the outdoor unit has been refined and optimized for long range application, up to 35Km.
 Temperature — the outdoor unit is tested for normal operation in the ambient temperatures from -35°C
to 70°C. Operating in temperatures outside of this range may cause the unit malfunctioned.
 Wind Velocity— the outdoor unit can operate in winds up to 90mph and survive higher wind speeds up
to 125mph. You must consider the known maximum wind velocity and direction at the site and be sure
that any supporting structure, such as a pole, mast, or tower, built to withstand this force.
 Lightning — the outdoor unit includes lightning protection circuits inside. However, you should make sure
that the unit, any supporting structure, and cables are all properly grounded. Additional protection using
lightning rods, lightning arrestors, or surge suppressors may also employed.
 Rain — the weather plays one of major matters to the antenna performance for the wireless
communication. The raining day, the lightning day, the cloudy day, or the windy day will make a quite big
impact to both side antennas over the communication results. It will also affect the communication
quality. The outdoor unit is a weatherproofed outdoor unit, which can operate in extremely weather
environment. You may need to use the sealing tape around the external antenna port connectors for
extra protection. If moisture enters the connector, it may cause degradation in performance or even a
complete failure of the link.