User manual

MIMO 2x2 Wireless Outdoor Access Point System User Manual

1) Enable / Disable 5GHz Radio

Click the radio box to enable/disable 2.4GHz Radio. It is enabled by default.

2) Wireless Mode

Figure 27. 2.4GHz wireless mode page

There are four wireless modes: WiFi 11g (54Mbps), WiFi 11ng HT20 (150Mpbs), WiFi 11ng HT40+ and WiFi

11ng HT40- (300Mbps).

3) Channel (Radio Frequency)

Select a radio channel according to the availability or system plan.

4) SSID

The SSID is the unique name shared among all points in a wireless network. The SSID must be identical for

all points in the wireless network. It is case-sensitive and must not exceed 32 alphanumeric characters,

which may be any keyboard character. Make sure this setting is the same for all points in your wireless

network. For added security, you should change the SSID from the default AP_2G to a unique name. This