Manualshelf

User manual

ManualsBrandsMIMO ManualsComputer equipment300Mbps WiFi High PowerOutdoor Access Point/Bridge
21222324252627282930
MIMO 2x2 Wireless Outdoor Access Point System User Manual
28
6) Remote Bridge Setup
Figure 19. Remote bridge setup page
In order to establish the wireless link between Bridge Radios, the MAC address of remote Bridge(s) needs
to be registered in the address filed. Enter the MAC address with format as xx:xx:xx:xx:xx:xx (x is the
hexadecimal digit). Master Bridge Radio may accommodate up to 8 remote MAC addresses by the current
firmware. In addition, Slave Bridge Radio supports only 1 MAC address which have to be the Master
Bridge.