User manual

MIMO 2x2 Wireless Outdoor Access Point System User Manual

2.4.3 Upgrade

The reboot function can be apply by clicking “System -> Upgrade” from left side menu

Figure 12. Upgrade page

When the new version of firmware has been received, you can upload the file by the web interface for upgrade the

firmware. The page can be access by clicking ”System -> Upgrade” from the left side menu.

Note:

(a). Before upload the new version of firmware, please read the new firmware release note to

confirm the new firmware features, upgrade environment, and procedures can meet the upgrade

requirements.

(b). in case network disruption happens during file uploading, system will still keep on running

with current active firmware. You may perform the file upload again when network is back to

normal.

1) Click “Browse” button and select the firmware files to be uploaded from the PC.

2) Click “Upload”.

3) When uploading is completed, system will prompt the successful message! Then reboot to

perform the new version of firmware.

4) Click “Reboot” for new firmware to take effect.