User manual

MIMO 2x2 Wireless Outdoor Access Point System User Manual

7) NTP

The Network Time Protocol (NTP) is a protocol and software implementation for synchronizing the clocks

of computer systems over packet-switched, variable-latency data networks. The available NTP server IP

& its availability can be found by the following hyperlink (http://www.pool.ntp.org/en/). Enable this

feature and specific the IP address of NTP server IP to get the system date & time through NTP protocol.

Time zone: specify the time zone that the product located. This setting is based on the GMT (Greenwich

Mean Time).

Daylight Saving Time: Many countries, and sometimes just certain regions of countries, adopt daylight

saving time (DST) during part of the year. It needs to enable or disable based on the product located

countries or area.

Confirm your setup then clicking “Save” button to perform

8) Factory Default

Reset All indicates all the settings will return to default value. Reset All, but Keep IP Settings indicates the

IP setting stays and other setting return to default.