User manual

MIMO 2x2 Wireless Outdoor Access Point System User Manual
18
3) Password
Change Password by entering a new password twice, click Save and then Reboot. User will be asked to
login again with new password after reboot (the password is case sensitive).
4) SNMP Community
S SNMP Community name is a string for administrator to read and write the SNMP MIB from external
SNMP manager. The default SNMP community name is “public” for read community, and “private” for
write community. You may change the community name as your plan. Confirm your setup then clicking
“Save” button to perform.
5) ICMP Echo
By default, the value is Enable. Ping is a computer network administration utility used to test the reach
ability of a host on an Internet Protocol (IP) network and to measure the round-trip time for messages
sent from the originating host to a destination computer. The name comes from active sonar terminology.
Ping operates by sending Internet Control Message Protocol (ICMP) echo request packets to the target
host and waiting for an ICMP response. In the process, it measures the time from transmission to
reception round-trip time and records any packet loss. The results of the test are printed in the form of a
statistical summary of the response packets received, including the minimum, maximum, and the mean
round-trip times, and sometimes the standard deviation of the mean.
6) Management VLAN
By default, the values 0 indicates Disable. If you have enabled VLAN tagging on your network, specify the
VLAN tag ID from 2 to 4094. You can assign an SSID to a VLAN. Client devices using the SSID are grouped
in that VLAN