User manual

MIMO 2x2 Wireless Outdoor Access Point System User Manual

2.4 Basic Configuration

2.4.1 System Setting

This page can be accessed by clicking System > Setting.

Figure 10. System Setting page

1) Country

You can set the AP to follow different country and region regulation.

2) IP Address

DHCP Client

Select this if your Internet Service Provider (ISP) uses a DHCP service to assign an IP address to your

router when connecting to the Internet.

Static/ Subnet Mask/ Gateway

Note that each outdoor unit in the same network must be assigned with an unique IP address.

Therefore, you may need to have a network plan before deployment. Enter the IP address, Subnet Mask

according to the plan. Changes of IP Address / Subnet Mask will be applied after you click Save.