User guide

Page 30 of 49
3. Configure 5GHz Bridge
3.1 Bridge Configuration
This page can be access by clicking “Bridge -> Setting” from left side menu
Figure 16 5GHz Radio Basic Setting Page
1) Enable / Disable 5GHz Radio
Click the radio box to enable/disable 5GHz Radio. It is enabled by default.
2) Wireless Mode
There is three wireless modes provide 54Mbps (802.11a), and 150Mbps
(802.11a/n HT-20), and 300Mbps (802.11a/n HT-40+, 802.11a/n HT-40-). It
is required to set up the same wireless mode between the bridge links to
communicate each other.
3) Radio channel