User guide

Page 24 of 49
Time zone: specify the time zone that the product located. This setting is
based on the GMT (Greenwich Mean Time).
Daylight Saving Time: Many countries, and sometimes just certain regions of
countries, adopt daylight saving time (DST) during part of the year. It needs
to enable or disable based on the product located countries or area.
Confirm your setup then clicking “Save” button to perform.
8) Reset to Factory Default button
Click this button to set all the parameters back to factory default value
by “Reset All” button, or all the parameters back to factory default
value but keep the existing IP setting by “Reset All, but keep IP
Settings” button. This command only set the configuration parameters to
the factory default value, and the software version would be keep in the
current activate version.
Warning: The IP Address and Password will be reset if “Reset All”
button selected after reboot. Please use the default value for next login.
9) click “Reboot” button when you finish setting up for parameter changes
taking effect.