Installation & Assembly

6.Pre-heating with 10-15 minutes. Remove the door and put the pizza on the pizza stone using the
pizza shovel. When the fire burns to the max, please remember to use the pizza shovel to rotate the
pizza from time to time to keep the side near the fire from scorching.
7.Open the lid to add pellets if needed then close the lid after finishing the pellets charging.
Please make sure the lid is always closed, only open it when adding pellet.
8. Let the pellets burn through, and make the remaining ash cool down naturally for at least 60
minutes. Wear heat-resistant gloves and use the handle to carefully remove the pellet collector.
Pour the ash into a metal bucket of water.