User guide

Caring for MimioProjector
Replacing the Remote Control Battery
To ensure safe operation, please observe the following precautions :
n Use only CR2025 type battery.
Using the incorrect battery type may cause explosion.
n Avoid contact with water or liquid.
n Do not expose the remote control to moisture or heat.
n Do not drop the remote control.
n If the battery leaks while inserted in the remote control, carefully wipe the case clean
and install new battery.
n Dispose of used battery according to battery instructions.
To replace the battery
1. Press firmly and slide the battery holder out of the battery compartment.
2. Remove the old battery from the battery holder.
3. Insert a new battery into the battery holder with the + polarity marking facing up as
shown.
3
V
O
L
T
S
CR2025
4. Slide the battery holder back into the battery compartment and press firmly.
M
3
V
O
L
T
S
CR2025
37
Chapter 4