User guide
Table Of Contents
- About MimioProjector
- Getting Started
- Changing the Projector Settings
- Caring for MimioProjector
- Getting Help
- General Troubleshooting
- Image Troubleshooting
- No image is displayed
- A partial, scrolling, or incorrect image is displayed
- The notebook computer display is not displaying an image
- Image is unstable or flickering
- Image has vertical flickering bar
- Image is out of focus
- Image is stretched when displaying 16:9 DVD image
- Image is too small or too large
- Image is displayed with slanted sides
- Image is reversed
- 3D Troubleshooting
- Sound Troubleshooting
- Remote Control Troubleshooting
- Contacting Mimio
- Compatibility Modes
- Technical and Environmental Information
Adjusting the Volume
Adjusting the Volume
You can adjust the projector volume settings.
Mute
You can choose to mute the projector audio.
You can also press Mute on the remote control to turn mute on and off.
Volume
Use this setting to increase or decrease the speaker volume.
Press ◄ to decrease the volume.
Press ► to increase the volume.
You can also use the volume buttons on the remote control to adjust the volume.
Microphone Volume
Use this setting to increase or decrease the microphone volume.
Press ◄ to decrease the volume.
Press ► to increase the volume.
35