User guide

Changing the Projector Settings
Logo Capture
You can capture an image to display on projector startup.
Press ► to capture the image currently displayed on the screen.
Notes
l Ensure that the displayed image does not exceed the native resolution of the
projector (WXGA:1280x800).
l Logo Capture is not available when 3D is enabled.
l The aspect ratio should be set to Auto before using capturing an image.
Auto Source
Select how to handle searching for an input source when the projector loses signal from the
current input source.
n On - the projector searches for signals from other input sources when the current input
signal is lost
n Off - the projector searches only for a signal from the current input connection when the
current input signal is lost
Input
Use this option to select the input types that the projector will search for.
1. From the Options menu, select Input, and then press ►.
2. Select the input that you do not want the projector to search for, and then press ► to
clear the check box for the selected input type.
Auto Power Off
The projector has an auto-off feature which automatically turns the projector off when no
input signal is received by the projector for a set amount of time.
You can set the amount of time the projector will stay on before automatically turning off .
Lamp Setting
Lamp Hours Used (Normal)
View the amount of time the projector has been used in normal lamp power mode.
Lamp Hours Used (ECO)
View the amount of time the projector has been used in ECO lamp power mode.
Lamp Life Reminder
You can choose whether or not the projector displays a warning message when the lamp is
nearing end of life.
28